Standard Loft Hatches

Standard Loft Hatches give access to roof voids.

BESPOKE Loft Hatch

BESPOKE | HINGED ACCESS

SDS Insulated with mineral wool and draught proof, Part L compliant (U-Value 0.32)
We recommend Hatches larger than 750mm have 2 x Locks to ensure it is Air tight
Part L Compliant (U-Value 0.32W/m²K) along with stunning air test rating of 0.23/m3/m/h @ 50 Pascals

Comes with free opening pole (Not suitable for Key lock version)
Key Lockable option available
Fabricated using 1.2mm Zintec steel
Made to Measure to bespoke requirements, note this product is non-returnable

Specifications

Please supply us with the length and width of your loft opening (the distance between the joists) in mm, and then deduct 5mm from each measurement (please note you'll be asked to do this when placing your order).

This is to allow for the loft opening being marginally out of square, and gives a small tolerance when fitting the hatch (please call for advice if unsure or the opening is badly made).

The external frame will extend 25mm on each side beyond these dimensions, but we can extend this to 50mm if required (you'll be offered this option when placing your order).

Note if your hatch is longer than 750mm on the width/hinge side we recommend making the bespoke panel with 2 locks to ensure a tight draft seal between the door and frame (please contact us)

Made to measure Loft Hatch description:

A high quality, precision-made hinged metal loft hatch suitable for all types of house. Each hatch is made to your exact measurements. The hatch is designed to be subtle and clean, with a minimal protrusion of 7mm from the ceiling when fitted. All hinges and fixings are concealed; and the lid is fitted with a neat alloy lock.

Construction and finish Each hatch is fabricated from corrosion resistant 1mm Zintec Steel (Zinc coated). The mitred frame and lid are powder coated white RAL No. 9010 with 20% gloss for a satin finish. The hatch frame depth is 63mm (going up into the loft).

Insulation and draught resistance:

A primary function of any loft hatch should be to keep heat in your home, and cold air draughts in your loft. Loft hatches are an increasingly important part of building regulations relating to the conservation of heat and power within our homes.

Our hatch design features a concealed seal between the loft door and the frame. This results in an incredible airtightness rating. The lid is filled with 50mm of exposed mineral wool insulation. This hatch has a U value of 0.32 and complies with the requirements of Part L of the Building Regulations.

Lock options:

Standard - Tri-drive lock with an O-ring seal on the shaft for the ultimate airtightness.

Key lockable - key operated.

Both lock options operate a chamfered cam which progressively applies pressure when closed, ensuring the best possible airtightness.